Environmental Non-Toxic 1:1 Mix Ratio Fast Set Two-Part Silicone
Mold Putty For Dental Impression Use
Product Description
Silicone Putty is ideal for a wide range of impression type mold
applications, including Castin’Craft Clear Casting Resin, EasyCast
Clear Casting Epoxy, wax, baking, chocolates, ice cubes, soap,
plaster, air dry clay, concrete and low melt metals! EasyMold is a
easy to use, Odor Free, Non-Toxic, Food Grade, two component
silicone putty, whichdoes not shrink and remains resilient
throughout the life of application.
Fast Curing and Durable
Our putty is non-toxic and odor free. It will handle heat up to 450
F.
Self-releasing – no mold release agent required for most
applications. Long shelf life, no shrinkage. Not intended for food
contact applications.
Physical Properties:
| Before Curing | Catalyst Components | Base Components |
| Appearance | White putty | Blue putty |
| Mix ratio | 1:1 |
| Pot life | <1 minute |
| Curing time(37C) | <5minutes |
| After Curing |
| Hardness(Shore A) | 65 |
| Permanent deformation % | <0.2% |
| Dimensional stability % | <0.25 |
| Copy details(μm) | <1.5 |
| Tearing Strength Mpa4 | 2.0 |
| Elongation% | 267 |
Usage Instruction
1. Under the room temperature, take the same amount of base
component (blue) and catalyst component (white).
2. Mix the two components together. It is recommended to use the
blue spoon to take the base component and white spoon to take
catalyst component.
3. Use your fingertips to mix the two components together and knead
for at least 30 seconds until they are mixed completely.
4. Close the lid immediately
after usage, the cover can not be interchanged.
Package
500g, 1kg, 5kg, 10kg, 25kg
Why choose MC silicone putty?
Skin-safe
Non-toxic - contains no nasties
Fast Cure - sets within 30 minutes
Easy - you don't even need to weigh it... just take out two equal
looking amounts of putty from the tubs
No mould box needed - this putty can be used on vertical surfaces,
3d items and even on your toes (if that's your kind of thing)
Vegan-friendly & cruelty-free
Precautions
1. Do not use natural rubber gloves. It is recommended to use
disposable polyethylene plastic gloves.
2. The product contains platinum catalyst, sulfur, phosphorus,
amine, etc. will slow down or even stop the curing reaction, and
thus it must avoid sulfur, phosphorus, amine, acrylic and meth
acrylic acid esters and other chemical products in use.
3. Close the lid tightly and immediately after use, keep it in cool
place, and be refrigerated in summer.
4. The temperature has a significant impact on the curing time; the
curing reaction will slow down at low temperature, and speed up at
high temperature curing speed. It should adjust operation rhythm
according to the environment and the finger temperature.
5. It is strictly recommended to use the same amount of base and
catalyst. Unequal amount will lead to delayed or accelerated cure.
