Fast Set Two-Part Silicone Silicone Mold Putty For Making Pads For
Horse Hoof Better Care
Product Description
Silicone putty is formulated specifically for industrial
applications where shock absorption and support are necessary. Two
formulations are available: Firm support and super-cushion. These
two-component systems are activated by mixing equal parts together
until a uniform color is achieved at which point the hoof is packed
and a full pad is applied. The full weight of the horse is applied
for a custom fit and excess material is trimmed away. Benefits
include: orthopedic support for the coffin bone; increased blood
circulation; conforms to hoof with the movement of the horse; does
not shrink and remains resilient throughout the life of
application.
Silicone putty is measured 1:1 by volume (no scale necessary) and
mixed together fast by hand kneading. The mixed putty is then
placed in the bottom of the horse hoof after it has been cleaned
and prepared.
The material needs to be fast curing, safe for the horse, and
reliably sturdy and strong.
Hoof putty, ideal for filling old nail holes. Easy to apply and
shape for a clean result. Protects the old nail hole against
penetration of moisture and debris.
Physical Properties:
| Before Curing | Catalyst Components | Base Components |
| Appearance | White putty | Blue putty |
| Mix ratio | 1:1 |
| Pot life | 2-3minutes |
| Curing time(37C) | <20 minutes |
| After Curing |
| Hardness(Shore A) | 35 |
| Permanent deformation % | <0.2% |
| Dimensional stability % | <0.25 |
| Copy details(μm) | <1.5 |
| Tearing Strength Mpa4 | .0 |
| Temperature stability | 60°C for 1 week |
| Elongation% | 350 |
Usage Instruction
1. Under the room temperature, take the same amount of base
component (blue) and catalyst component (white).
2. Mix the two components together. It is recommended to use the
blue spoon to take the base component and white spoon to take
catalyst component.
3. Use your fingertips to mix the two components together and knead
for at least 30 seconds until they are mixed completely.
4. Close the lid immediately
after usage, the cover can not be interchanged.
Package
500g, 1kg, 5kg, 10kg, 25kg
Why choose MC silicone putty?
Skin-safe
Non-toxic - contains no nasties
Fast Cure - sets within 30 minutes
Easy - you don't even need to weigh it... just take out two equal
looking amounts of putty from the tubs
No mould box needed - this putty can be used on vertical surfaces,
3d items and even on your toes (if that's your kind of thing)
Vegan-friendly & cruelty-free
Precautions
1. Do not use natural rubber gloves. It is recommended to use
disposable polyethylene plastic gloves.
2. The product contains platinum catalyst, sulfur, phosphorus,
amine, etc. will slow down or even stop the curing reaction, and
thus it must avoid sulfur, phosphorus, amine, acrylic and meth
acrylic acid esters and other chemical products in use.
3. Close the lid tightly and immediately after use, keep it in cool
place, and be refrigerated in summer.
4. The temperature has a significant impact on the curing time; the
curing reaction will slow down at low temperature, and speed up at
high temperature curing speed. It should adjust operation rhythm
according to the environment and the finger temperature.
5. It is strictly recommended to use the same amount of base and
catalyst. Unequal amount will lead to delayed or accelerated cure.
